July 09, 2003

Guns > .410 Handguns and Some Excellent Gun Links

I mentioned the Thunder Five .410 bore shotgun revolver a few weeks ago. It's apparently no longer made, but I found two more .410 handguns.

The American Derringer Model 4 is available in .45 and .410 shotgun. It's so small and light I'd be seriously concerned about damaging my wrist. Pass.

Magnum Research BFR revolverIn a completely different category is the Magnum Research BFR revolver. With a big frame, long barrel, and optional ported muzzle, it wouldn't be any harder to control the .410 than it would be to shoot a .454 Casull or a .45-70, which the big revolvers are also chambered in. In fact, the .410 would be the easiest of the three.

Another option would be a to buy a .44 Magnum and load it up with snake shot. Same effect, plus you get the option of bullets for long-range precision, and .44 Special loads for target practice. There are plenty of offerings, from the original Smith & Wesson "Dirty Harry" Model 29 or the newer S&W Mountain Gun to the Ruger Super Blackhawk, Ruger Vaquero, and Taurus Titanium Tracker, to mention a few.

Gun Links

Kim Dutoit's Gratuitous Gun Pics
Chuck Hawks
Gallery of Guns reviews section
Alphecca's Weekly Report on Gun Bias in the Media
Smith and Wesson Discussion Forum
The Gun Zone: Rules of Gunfighting

The first rule of gunfighting? Bring a gun.

Posted by lesjones



Comments

i am looking for any prices for my friends gun collection. his father passed and left 6 rifles and two handguns and my friend wants to sell them.
ideas? Browning 20 gauge twin barrel that are on top of each other not side by side. Flute King Deluxe 410 gauge. trademark Favorite .22 octagon long childs/womans rifle model 1915 J Stevens Arms & Tool Company. Winchester .22 rifle childs/womans rifle model 67A bolt action. Dakin Gun Company of San Francisco, Union Armera made in Spain double barrel shotgun model 215 inlaid with gold and silver etchings gorgeous! Iver Johnson 38 s&w top break 5 shot pistol. h & r model 622 22 cal 6 shot pistol. Any information would be greatly appreciated! Thanks, Julie stoddardclan@hotmail.com

Posted by: julie at March 24, 2004

I,have a 16 gauge double barrel, amera union dakin gun company san fransisco made in spain. It has S.L.EBAR on one of the barrels and both silver side plates. My father left it amoung other guns to me. Its in mint condition,silver side plates,trigger guard,the switch to let the barrels down, it has double triggers that appear to be gold or bronze in color, the wood and the silver is highly engraved. The gun has not been fired many times. IF ANYONE COULD TELL ME ANYHING ABOUT THIS GUN MAYBE WHAT IT COULD BE WORTH IT WOULD BE GREATLY APPREACIATTED THANK-YOU.

Posted by: Brian at April 13, 2004

contact me at hampton420@hotmail.com thanks about the 16 guage double barrel amera union

Posted by: Brian at April 13, 2004

THIS GUN WAS LEFT TO ME FROM MY GRANDFATHER A DAKIN 12 GAUGE BRESHI SALVINELLI, QUESTION ANY VALUE TO IT, AND IS IT SALEABLE?

Posted by: VICKI at April 25, 2004

I have a STevens 410 double barrel Serial Number A530824. It is in used but good condition. I am looking for information on the year it was made and a value. contact me at turkey@voyager.net

Posted by: marv at May 31, 2004

I didn't know I was out of business . . . I'm still selling brand new Thunder Five revolvers at: http://www.thunder5.com/

Posted by: Thunder5 at September 19, 2004

I have a singel shot 410 J.Stevens arms Moldel # 54. I need a replacement bolt. Does anyone know where to get one? Please let me know my 9yr wants his grandpa's gun fixed. Thank you

Posted by: Tina at November 30, 2004

I am looking for a winchester .22 bolt on a model 74 any help is appreicated you can call me at (210)366-0666 or email me at ajohnson0316@sbcglobal.net

Posted by: PJ at January 28, 2005

Looking for Stevens 311 shotguns. Have A's and H's would like guns made in other years.

Posted by: Milt at March 19, 2005

any info on dakin 20 gauge made by union amera

Posted by: eppie at March 27, 2005

any info on dakin 20 gauge made by union amera

Posted by: eppie at March 27, 2005

any info on dakin 20 gauge made by union amera

Posted by: eppie at March 27, 2005

I have a J Stevens 410 single barrel shotgun, Model 94A. It was passed down to me and I in turn passed it on to my own son. Does anyone have any idea as to its age and/or value?

Posted by: Linden at May 27, 2005

i would be very interested in a 410 or 20ga dbl barrell,stevens 311. if anyone has one for sale,give me a shout. thank you much

Posted by: dean at June 25, 2005

i seem to remember seeing in the movie 3 kings a very large revolver, through the commentary i learned it was a shotgun revolver called something like the fox fire 5... but when i search for it all that comes up is a stupid book. i just wanna see pictures of it. it is awesome. anyone else know of this thing?.

Posted by: tim at June 30, 2005

I am looking for information (particularly value) on a Dakin MO 144 in .410 Gauge, side by side. It is in excellent condition. I cannot locate this model in any of the books. Can anyone help??
Bob

Posted by: Bob at August 03, 2005

I have a stevens 410 gauge model 94 series P, if anyone knows what the value is please help?

Posted by: tedd at August 08, 2005

Does anyone know where to get a 410 modle 58A bolt.

Posted by: Brandon Sanchez at August 10, 2005

I am looking for a stevens 16 guage side by side that is in very good condition. Please contact me if you have one or know where to find one. Thanks.

Posted by: Mike at September 08, 2005

Hi:

I would like to see any information on the 410G pistol. I ride dirt bickes and would like to have a gun that I could shoot Quail and other stuff when I am out on a ride.

Ron Bell

Posted by: Ron Bell at September 24, 2005

my friend has a 16 gauge stevens side by side shotgun from 1915. any idea on price?

Posted by: matt prezz at October 10, 2005

ruger 45/410 revolver?? i have 1

Posted by: donbd at October 11, 2005

I have a J Stevens 410 single barrel shotgun, Model 94A. It was passed down to me and I in turn passed it on to my own son. Does anyone have any idea as to its age and/or value?

Likewise, I have a J Stevens 410 single barrel shotgun, Model 94A. It was passed down to me and I in turn passed it on to my grandson. Does anyone have any idea as to its age and/or value?

Did you get a response to this question?

Posted by: at December 10, 2005

I have a model 1897 12 ga. open hammer Winchester pump shotgun which is in good to very good condition. It was last fired in the 1960's. Serial #552326 which makes it a 1913 manufacture date. Any one have an idea on the value of such a gun?

Posted by: Lew Jenkins at December 10, 2005

do you know where I can find a J.Peerless 16 gauge double barrel ejecter?

Please help me!
/Cleo/

Posted by: at December 31, 2005

I am looking to buy a Rossi double barrel 410 side by side. I live in E> Texas Would consider another brand. 903 764 2444

Posted by: jerry mclemore at January 01, 2006

have 45/410 ruger blackhawk>shoots 3in 410 or 45 colt>nickle finish >

Posted by: don davis at January 16, 2006

I have a J. Stevens 12 ga. side by side. I've been looking for a few parts to restore it. I'm in need of a firing hammer. Anyone know where to look?

Posted by: James at January 19, 2006

looking for thunder5 pistol,

Posted by: william j lakey at April 01, 2006

looking for thunder5 pistol

Posted by: lakey at April 01, 2006

i have a smith and wesson 12 guage pump action in very good cond. blued, black not fired much my dad purchased it from sears and roebuck when it was able to buy a gun there its a model 916 t with interchangeable barrels, could anyone tell me how much this gun is worth. because i have heard so many different values

Posted by: brian at July 12, 2006

try whittaker guns it is in kentucky, in a place called west louisville, i actually seen a 410 revolver there one time not sure if it was a thunder 5 but i bet he can get you one, simply because he has a barrett bmg 50 cal in there and a couple of other hard to get items, he is on the web at whittaker guns.

Posted by: brian at July 12, 2006

I know of a 410 Gauge sigle shot handgun made by Stevens arms over 50 years ago. What can you tell mw about its value

Posted by: James C Ackley at July 28, 2006

I have a Stevens / savage 410 model 94 and am looking for a bolt. Anyone know of where I might get such an item? 806-584-9720

Posted by: Scott at August 08, 2006

I have a Rossi pistol that has side-by-side barrels, breaks like a shotgun, and fires .22 long rifle shells. I'd like to get some idea of its possible value from anyone who knows, or who can direct me in the right direction. There is a "46" on the inside (when broken open), and the serial number is B46863. I have the leather holster that came with it as well. One gun dealer thought it might be as early as 1900-1910; it's not in the blue book.

Dave

Posted by: Dave at September 23, 2006

HELP I am looking for a forearm spring for a Steven)s 1915 12 gauge double barrel.

Posted by: Hank at September 27, 2006

HELP I am looking for a forearm spring for a Steven)s 1915 12 gauge double barrel.

Posted by: Hank at September 28, 2006

Noted reference to a Dakin 20 gauge side by side in your dialog. I am looking for a Dakin action to replace a lost 20 gauge action. I possess the barrels,stocks and trigger mechanism. Have other trades or will pay cash for this item or full 20 gauge Dakin......
please advise...!
thank you for a response to this quest!

Posted by: Steve Dunn at October 25, 2006

Noted reference to a Dakin 20 gauge side by side in your dialog. I am looking for a Dakin action(frame) to replace a lost 20 gauge action. I possess the barrels,stocks and trigger mechanism. Have other trades or will pay cash for this item or full 20 gauge Dakin......
please advise...!
thank you for a response to this quest!
I can be reached at spirithorses@nehalemtel.net
or 503.368.5431

Posted by: Steve Dunn at November 01, 2006

I have a single shot shotgun imported from italy ,that my dad bought in the early 60's.I'm looking for info on this gun the name is salvetti.and it is a single shot ,folding 20 guage,feather weight any help thanks Randy

Posted by: Randy Skalku at December 03, 2006

I am looking to buy a double barrel 410. Any brand. Contact me at je_mclemore@yahoo.com or call 903 764 2444./

Posted by: jerry mclemore at December 27, 2006

AM looking for 410 ga single barrel used or hand gun 410 ga.neil bradford 3109 w folsom st. Eau claire ws 54703 thanks

Posted by: neil bradford at January 03, 2007

I am looking to find out what a Smith & Wesson modle 19-4 inch is going for

Posted by: nomar at January 07, 2007

I have a iver johnson 410 skeeter with single trigger and ejectors. What makes this rare is that it has extra barrel set with matching numbers.Dose any one no how much it is worth and where i can sell it.

Posted by: stuart pearson at January 14, 2007

Anyone know here I can get a hammer for a very old J.Manton & Son dbl barrel? This neat old gun has a broken right hammer. The gun is probably late 1890" but not too sure. any help would be appreciated. It's my first gun!

Posted by: Jake at January 19, 2007

I am trying to find a savage 410 double barrel side by side shotgun model 311. i live near cincinnati ohio45036. Please e mail me if available.1-24-2007 date.

Posted by: ken butterworth at January 24, 2007

RE:
Posted by: matt prezz at October 10, 2005 05:37 PM
ruger 45/410 revolver?? i have 1

I cannot locate a "ruger" 45/410 revolver anywhere.
Is their such a thing? How can I find one?
Clark

Posted by: Clark Callear at February 02, 2007

A friend at work was given a side by side 16 gage shotgun that had been outside for a time. He's trying to determine what brand and if it's safe to use. The only markings are a 1915 date and the name "Valiant" on a side plate. I haven't found any reference to that name in the gun guides or catalogs. Do you have any idea as to what this is?

Posted by: Marty DeWyn at February 12, 2007

i have a old stevens 410 double barrel shotgun side by side asking 2000.00 call 478-955-7757

Posted by: jason jones at February 24, 2007

i have a old stevens 410 double barrel shotgun side by side asking 2000.00 call 478-955-7757

Posted by: jason jones at February 24, 2007

i have a 1915 stevens side by side 12 gauge. i was wondering what the value on it was.it is all original with matching serial numbers to all parts.it is in good shap but has mall crack in stock.

Posted by: ken at May 01, 2007

I have a Rossi (Interarms import) .410 side by side shotgun with double hammers and triggers. Make an offer.

Posted by: Jay at August 31, 2007

I have an old breech load 10 gauge shotgun. Date on inside of trigger mechanism is 1857. Has a
hammer similar to a flintlock. On the barrel are
the words: "choke GREENBACK bored" in gold paint
which seems to be very durable. Numerous other
markings on various parts. Most significant to me
are the letters: E
LG inside of an oval with a small star under it. Serial number appears to be 1537. Any information would be helpful

Posted by: Dick Vorodi at November 01, 2007

I am looking for a Stevens double barrel 410 side by side. 912-856-1084 if I don't answer leave message.

Posted by: Kevin at November 02, 2007

Answer to Stuart Pearson re: Iver Johnson .410 Skeeter: Stuart, please contact me at (918)742-0482 or tad@ent-tulsa.com. I need the extra set of barrels that you have. Tom Dodson

Posted by: Tom Dodson at February 17, 2008

I am looking for a 410 pump shotgun model 42 in good to excellent condition. As I understand their were a couple companies that made them but all used the same model number,
Posted by jpmesser 3 8 2008

Posted by: jpmesser at March 08, 2008

have any info on a Dakin Single shot 12 ga.

Posted by: corey at March 27, 2008

have any info on a Dakin Single shot 12 ga.

Posted by: corey at March 27, 2008

Looking for the value of a 1913 410 stevens single shot.

Posted by: kathy at March 30, 2008
Post a comment










Remember personal info?







Terms of Use